Best Paint For Stucco in 2023 - Klappenberger & Son (2023)

With millions of homes that need painting every year, wouldn’t it be nice to hear from the experts about the best paint for stucco in 2023?

For example, painting contractors can tell us what paints cover the best. However, typically they are not visiting their work three, five, or eight years later.

And if a painting contractor did check up years later, by the time they did, the paint manufacturer might have changed the formula of the paint.

As a painting contractor since 1989, I can tell you I’ve painted many homes and cannot remember the brand of paint I used after a year or two has passed.

I can observe the difference in coverage, workability, and finish, but I can’t conclude which one will last the longest. Therefore, I think the best thing to do is to follow the science.

I have talked to several people who have been in the paint manufacturing industry with both Sherwin Williams and Ben Moore. I respect their opinions and have found them to be candid.

My question was simple. If the price was not a significant factor, what product would you use on a stucco home and why?

Their answers were mainly analytical and factual, including a few interesting stories.

Request a Free Estimate

There are many different options for finding the best paint for stucco. I could probably find 100 paints suitable for stucco if I searched long enough. For example, Sherwin Williams has 15 different products made explicitly for masonry surfaces.

To shorten the list, I will divide the choices into three camps, namely acrylic masonry, elastomeric paint systems, and universal exterior paints.

Regardless of what paint you choose, the job should start with a good power washing to remove chalkiness, mildew, and dirt.

Elastomeric paints are very flexible.

How flexible? How about 300 – 600%!

Elastomeric is like rubber in a paint can.

It is a waterproof paint system. When you hear “paint system,” you might have to use specific primers and conditioners before you apply the top coats of elastomeric.

It’s also very thick. About 2-3 times the thickness of your typical exterior paint.

These qualities certainly make it a great paint for stucco.

Request a Free Estimate

The Advantages Of Elastomeric On Stucco

When Elastomeric paint is applied correctly, it is actually a waterproof paint. It’s also a very thick paint, allowing it to bridge gaps and minor cracks.

Ben Moore UltraSpec Elastomeric has a 300% elongation.

In addition to its flexibility, the thickness gives it an exceptionally high build. One coat of Elastomeric has 2-3 times the thickness of a coat of standard acrylic paint.

The Disadvantages Of Elastomeric On Stucco

Pin wholes are the small areas that the elastomeric paint did not cover. These small pin holes happen when rolling too quickly, causing bubbling. The result is that these pin size holes allow water to enter behind the waterproof paint. The moisture then cannot transfer through the paint and collects behind the paint like water in a balloon.

The solution would be to apply a block filler on the stucco to ensure all pin holes are gone. Then, use either another coat of Elastomeric or any acrylic exterior paint.

A few elastomeric paints are breathable and allow moisture to transfer; UltraSpec is one. However, most elastomeric paint systems are not breathable.

Therefore, if you believe that there are any areas on the outside of the house where water can get behind the paint, elastomeric would not be a good choice.

Because the paint is thick, a gallon of elastomeric only spreads between 80-100 square feet per gallon. That’s about a third of what universal exterior paints would cover.

Though most elastomeric paints dry to the touch in 2 hours, a re-coat must wait until the following day. Having to wait this long between coats could increase the labor cost.

Elastomeric paints, such as Conflex Sherlastic, need to be applied when temperatures are above 50 degrees for 24 hours. Other masonry paint, such as Loxon XP, can be used when surface temperatures exceed 35 degrees.

And finally, if after power washing the surface still has a chalkiness left, it will need to be primed with a masonry conditioner. Other acrylic masonry paints can go directly over chalky surfaces.

Below is a short list in no particular order of excellent elastomeric paints.

Request a Free Estimate

Elastomeric Paints

Request a Free Estimate

Pros Of Acrylic Masonry Waterproofing Paint

Let me mention that elastomeric paint is acrylic paint. However, it has some slight differences from acrylic masonry paints worth mentioning.

The first advantage is that acrylic masonry (A.M.) paints can be applied when temperatures are as low as 35 degrees.

Secondly, A.M. paint is not a paint system. This means it can go directly over new concrete without priming.

Cons Of Acrylic Masonry Paint Vs. Elastomeric

The experts I spoke to believe the elastomeric has a slight edge when it comes to waterproofing, and the data supports that claim.

Below is a short list in no particular order of excellent acrylic masonry paints.

Request a Free Estimate

By “universal” paints, I mean paints that can be used on many surfaces, such as wood, vinyl, metal, stucco, etc. In other words, they are your standard or universal house paints.

Comparing them to acrylic masonry paints and elastomeric, it is easy to see the pros and cons.

The Pros of using Universal Exterior Paints

First, universal paints’ coverage is 2 -3 times greater.Secondly, you can choose any sheen. Thirdly, most dry faster than the acrylic masonry paints and elastomeric, making it easier to apply two coats in one day.

The Cons of using Universal Exterior Paints

The most glaring weakness of universal paints is the thickness. Elastomeric and acrylic masonry paints are 2-3 times thicker, which explains their poor coverage.

Experts agreed that even when one coat looks good, two coats add durability, protection, and longevity. If you can afford to apply a second coat, it will pay big dividends down the road.

Below is a short list in no particular order of excellent universal exterior paints.

Request a Free Estimate

I wasn’t expecting any of the regional sales reps to suggest a paint outside of their brand, but I was surprised they all chose the acrylic masonry paint.

Sherwin Williams Regional Sales Rep – picks Luxon XP

Ben Moore Regional Sales Rep – picks Regal High Build

PPG Regional Sales Rep – picks Perma-Crete

Surprisingly, none of the experts picked Elastomeric Paint Systems. Why?

Sherwin Williams Regional Sales Rep – “Luxon XP is easy to use, more available, and self-priming. In short, fewer variables than Conflex.”

Ben Moore Regional Sales Rep – picks Regal High Build.

“There are 350 square feet of coverage per gallon; some sheens are very mildew resistant, with excellent color retention.”

PPG Regional Sales Rep – picks Perma-Crete.

“It is a breathable, waterproof system that won’t trap moisture that must transfer through the paint.”

Request a Free Estimate